Nasveti za zamenjavo kartuš nadomestnih e-cigaret

The replacement of e-cigarette cartridges is a core part of daily maintenance. Improper operation may lead to oil leakage, poor contact or a decline in taste. The following are step-by-step practical tips and precautions to help users efficiently complete the replacement and optimize the experience:

First, preparations before replacement: Details determine success or failure

Confirm the compatibility of the cartridges

Brand and model matching: Give priority to choosing cigarette cartrpers of the same brand as the equipment (such as Relx Universal RELx cigarette cartrpers) to avoid oil leakage or poor contact caused by size or interface differences.

Check the condition of the e-cartridges: Observe whether the packaging of the e-cartridges is sealed properly and whether the e-liquid is clear and free of turbidity. If any oil leakage or strange smell is found, replace them immediately.

Clean the interface of the equipment

To remove residual e-liquid: Gently wipe the electrode contacts at the bottom of the device and the inner walls of the e-liquid cartridge compartment with a paper towel or cotton swab to prevent the condensate or e-liquid remaining from old e-liquids from corroding the contacts.

Drying treatment: If the interface is moist, it can be dried with a hair dryer on the cold air setting (at a distance of more than 10 centimeters) to prevent damage to the circuit due to high temperature.

Second, replacement operation: Precisely completed in three steps

Remove the old cartridges

Smooth pull-out: Hold the device and the cartridge with both hands and gently pull it upwards vertically. Avoid lateral force that may cause deformation of the electrode contacts.

Check the old cartridges: Observe whether there is any burnt residue or carbon deposits at the bottom of the cartridges. If so, clean the equipment interfaces before installing new cartridges.

Install new cartridges

Align the interface: Align the metal contact at the bottom of the new cartridge with the device interface, and gently press down until you hear a “click” sound to ensure it is installed properly.

Avoid excessive rotation: Some cartrpers need to be installed by pressing vertically. Forced rotation may cause damage to the contacts or displacement of the sealing ring.

First use activation

Stand and wait: After installation, let it stand for 1-2 minutes to allow the e-liquid to fully soak the atomizing core and prevent dry burning from causing a burnt smell.

Light suction test: First, take a small sip to test the taste. If there is a “gurgling sound” or oil leakage, recheck if the installation is in place.

Third, optimization after replacement: Enhance taste and lifespan

Adjust the suction method

The adaptation period for new cartridges: During the first five puffs, the suction force should be slightly lighter to avoid a burnt smell caused by the atomizing core not being fully moistened.

Control the suction frequency: Continuous suction should not exceed 5 ports, with an interval of more than 10 seconds, to prevent the atomization core from overheating.

Deal with the condensate

Daily cleaning: After each use, gently wipe the inside of the cigarette tip with a paper towel to prevent condensate from flowing back.

Regular disassembly and cleaning: Use a cotton swab to clean the condensate residue at the bottom of the cartridge and the interface with the equipment every week.

Storage and Maintenance

Storage of unused e-liquid cartridges: Unopened e-liquid cartridges should be kept in a cool and dry place (15-25℃), away from direct sunlight to prevent the e-liquid from deteriorating.

Equipment standby management: When not in use for a long time, remove the e-cartridge and clean the equipment interface to prevent the e-liquid from corroding the circuit.

Fourth, Common Problems and Solutions

The bomb is leaking oil.

Reasons: Improper installation, bumpy transportation or changes in air pressure.

Solution: Reinstall the cartridge and ensure that the sealing ring is not misaligned. If the oil leakage is severe, contact after-sales service for replacement.

The taste deteriorates.

Reasons: Oxidation of e-liquid, carbon deposits in the atomizing core or expiration of the e-cartridge.

Solution: Replace the cartridge with a new one; If the equipment has not been used for a long time, the flue needs to be cleaned and the atomization core replaced (if the core can be replaced).

Poor contact

Cause: Oxidation of the contacts or deformation of the contacts of the cartridge.

Solution: Use a cotton swab dipped in alcohol to gently wipe the contact point between the device and the cigarette cartridge. If the contacts are deformed, the components need to be replaced.

Fifth, advanced skills: Extend the lifespan of cigarette cartridges and enhance the experience

Mix and match cigarettes and cartridges

Flavor overlay: Alternate the use of cigarettes with different flavors (such as mint and fruit) to avoid taste fatigue.

Concentration adaptation: Select the concentration of the cartridge based on the nicotine demand and gradually reduce the concentration to assist in quitting smoking.

Equipment compatibility test

Compatibility verification: If third-party cartrida are used, conduct a small batch test first to ensure there is no oil leakage and the taste is normal before purchasing in large quantities.

Firmware Update: Some devices support firmware upgrades (such as through APP push) to optimize cartridge recognition and power matching.

Sixth, safety and environmental protection reminders

Safe operation

Avoid high temperatures: Do not place the device in a vehicle or in direct sunlight to prevent the e-liquid from expanding and leaking.

Child protection: After use, store the device out of reach of children. Before discarding the e-liquid cartridges, drain the remaining e-liquid.

Environmental protection treatment

Sorting and recycling: The shells of cigarette cartridges are mostly made of plastic and can be disassembled and sorted and recycled according to the material. Batteries need to be put into dedicated recycling bins.

Reduce waste: Select the capacity of the e-liquid cartridge based on the frequency of use (such as 1.8ml/2ml) to prevent the e-liquid from deteriorating due to expiration.

Key summary: The replacement of cartridge-changing electronic cigarettes should follow the principle of “fit – clean – standard”. Through a three-step process of pre-installation inspection, gentle operation during use, and post-use maintenance, the leakage rate can be significantly reduced and the taste can be improved. In case of any problems (such as oil leakage or no smoke), prioritize checking the contact points and sealing performance. Contact after-sales service if necessary. Key principle: The replacement of cartridets should take into account equipment compatibility, operational standardization, safety and environmental protection, and achieve the best experience through detailed optimization.