Korjausmenetelmät sähköisen savukkeen akkuja, jotka eivät lataudu

It is a common problem that the battery of an electronic cigarette fails to charge, which may be caused by charger failure, battery aging, poor interface contact, over-discharge protection of the device or damage to the mainboard, etc. The following are the specific maintenance ideas and operation suggestions:

First, check the charger and data cable

Replace the charger or data cable: Try using another compatible charger or data cable to charge the e-cigarette and confirm whether the charging device is damaged. If it returns to normal after replacement, the faulty parts need to be replaced.

Check the charging interface: Observe whether there is any foreign object blocking, oxidation or deformation on the charging interface. If there is dirt, you can use a cotton swab dipped in a small amount of alcohol to gently wipe the interface to ensure good contact.

Second, deal with the battery issue

Battery activation: If the e-cigarette has not been used for a long time and the battery enters an over-discharge protection state, you can try charging it continuously for more than 30 minutes. Some devices require a long press and hold of the power button to activate the battery before charging.

Battery replacement: If the battery is aged or damaged (such as bulging or leakage), contact after-sales service or professional maintenance personnel to replace the battery. Self-disassembly may cause damage to the equipment or pose safety hazards.

Third, inspect the contact points and internal connections

Clean the contact points: Check whether there is oxidation or dirt at the contact points between the cigarette stick and the charging case/charger. Wipe the contact points with a cotton swab dipped in alcohol to ensure good electrical conductivity.

Check the internal connection: If the battery inside the cigarette stick has poor contact with the stick body, you can try gently shaking the cigarette stick or pressing the battery position. If the problem persists, the machine needs to be disassembled to check whether the internal circuits or welding points are loose.

Fourth, over-discharge protection for handling equipment

Forced activation: Some e-cigarettes have triggered over-discharge protection due to long-term non-use. You need to connect the charger and hold down the power button for more than 10 seconds. After the indicator light flashes, release it and try to activate the battery.

Continuous charging: If activation is ineffective, the charging state can be maintained for 2 to 3 hours. For some devices, protection needs to be released through prolonged charging.

Fifth, check for motherboard or circuit faults

Professional inspection: If none of the above methods work, it might be due to motherboard damage or circuit failure. It is necessary to contact after-sales service or professional maintenance personnel to inspect the circuit board and repair or replace the faulty components.

Avoid disassembling by yourself: The internal structure of e-cigarettes is precise. Disassembling by non-professionals may result in the expiration of the warranty or secondary damage.

Sixth, daily usage suggestions

Use original accessories: Avoid using fast charging or non-original chargers to prevent battery overcharging or damage.

Regular maintenance: Regularly clean the charging interface and contact points to prevent dust or dirt from affecting charging.

Proper storage: When not in use for a long time, keep the battery charge at 40%-60% and charge it once every three months to prevent over-discharge.

Through the above steps, the charging problem of electronic cigarettes can be gradually investigated and solved. If the problem is complex or involves hardware damage, it is recommended to contact the official after-sales service or professional repair service first.