Funktionen för spänningsjusteringsknappen för elektroniska cigaretter

The functions of the voltage regulating button for electronic cigarettes mainly involve adjustments in aspects such as power and mode, as follows:

Power regulation: The voltage regulation button usually has two buttons, namely the up and down buttons. Users can increase or decrease the preset real-time output power by pressing these two buttons. The regulation of power is actually achieved by changing voltage and current, because power is determined by the product of voltage and current. Users can adjust the power range according to their own taste preferences. For instance, some e-cigarettes have a power range of 6-40W. Users can find the power that suits them within this range. If the power is too low, the e-liquid cannot evaporate fully, resulting in an insufficient user experience. If the power is too high, it may cause the core to burn and irritate the throat.

Mode switching: The voltage adjustment button of some e-cigarettes can be used to switch between different working modes. For example, some e-cigarettes have a three-level adjustment function. Pressing the button allows you to freely switch among the three modes. The first level is the ecological mode (Eco), with relatively low power, moderate smoke volume, and a soft and delicate taste. It is suitable for use in a quiet environment. The second mode is the Smooth mode. It has a moderate power, and the amount of smoke and the taste are relatively balanced. The suction is smooth and it is a common choice for daily use. The third mode is the Boost mode, which has a relatively high power and can produce thick smoke. It has a strong taste and can bring a more intense sense of satisfaction. It is suitable for outdoor use or when used alone.

Menu and Function Selection: In menu mode, the voltage adjustment button can be used to switch the Settings of different functions. For example, after pressing the ignition button to enter the menu MODE, you can switch to different setting interfaces by pressing the voltage adjustment button, such as SYSTEM (on/off), MODE (mode selection, including power mode and Joule mode, that is, temperature control mode), and UNIT (temperature unit selection, where C is Celsius). F for degrees Fahrenheit, TEMP (temperature setting), EXIT (exit menu), etc. In the corresponding Settings interface, pressing the “+” or “-” keys can make adjustments. For example, under the mode menu, pressing the “+” or “-” keys can switch between the power mode and the Joule mode. After selecting the power mode, press the ignition key to switch to the exit menu, and then press the “+” key to enter the power usage mode. After selecting the Joule mode, press the ignition key to switch to the temperature unit menu. Press the “+” key to switch between Celsius (C) and Fahrenheit (F). Then press the ignition key again to switch to the temperature setting menu. Press the “+” and “-” keys to increase or decrease the temperature. Finally, press the ignition key to switch to the exit menu. Then press the “+” key to enter the temperature control usage mode.

Combined function: The pressure regulating button can be used in combination with other keys to achieve more functions. For example, pressing “+” and “-” simultaneously can lock the real-time output power or temperature value of the host, detect the current resistance or fine-tune the resistance and lock the resistance. Rotate the screen direction and adjust the left and right hand usage mode (for hosts with preset mode function, after enabling the locked power or temperature, double-click “+” or “-” again to enter the preset mode selection interface). Press “Ignition” and “+” or “-” simultaneously to enter the menu selection or mode selection interface, turn on or off the lock resistor, switch the screen direction, adjust the left and right hand usage mode, turn on or off the screen display, and enter the output taste type selection interface. Pressing the “Switch”, “+” and “-” keys simultaneously can lock or unlock all the keys, locking the real-time output power or temperature values of the main unit.